These can swivel around if you need to mount on a particular angle once stuck down. They can also easily be removed from the 8mm duotight side as they simply click/clamp in to eachother.If you are to mount this inside your Kegerator / Keezer, you must do so when the unit is off / warm. It will not stick as well in a moist / cold environment. Best to give it atleast 24 hours of stick time before attaching weight / hosing to it. Wipe down surface with isopropyl alcohol prior to sticking.Most commonly to be used with: KL46244 – 8mm (5/16) duotight x 6 Way Manifold with Check Valves & Isolation Valves KL46237 – 8mm (5/16) duotight x 4 Way Manifold with Check Valves & Isolation Valves KL46220 – 8mm (5/16) duotight x 2 Way Manifold with Check Valves & Isolation Valves & KL46268 – duotight – 8mm (5/16) x 5 Way Multi-Tee If you want to know if your duotight fitting will fit this, it must be a grey duotight that has a black collet piece.Not suitable for 8mm ball lock disconnects Not suitable for multiple re-applications.
