DUE TO THE SIZE OF THIS PRODUCT, WE CANNOT SEND VIA COURIER, PLEASE ASK FOR A FREIGHT PRICE THROUGH OUR ENQUIRIES PAGE 118L Kegmenter – Great for fermenting under pressureUsing the 2″ TC Port 3600W Heating Element This oversized kegmenter can also be turned into a boiler for distillation with the 3600W heating element (sold separately). This element is 2inch Tri-Clover so it will fit directly into the port on the base of the Kegmenter. From there you would need a 4″ compatible still that is capable of running 3600w independently. (At this time KegLand does not stock such a beast)Using the 2200W Weldless Heating Element If you would like to use the AlcoEngine reflux still or pot still you will need to use the 2200w 10A weldless heating element that is stocked by KegLand and drill a 32mm hole for it through the wall of the Kegmenter. Then use a 10A Power Controller to adjust the wattage going to the still. You will also need to reduce the 4″ down to 2″ to use the still. For this we recommend: 4 inch to 2 inch concentric reducer and a 2 inch tri-clover clamp allowing large washes to be distilled in a single run to save time.Using as a Pressure Fermenter Alternatively, this kegmenter can be used for pressure fermentation by swapping the flat lid for a kegmenter lid with ball lock posts and floating dip tube and attaching a BlowTie Spunding Valve for pressure control.Download the Specification Sheet HereAccessories shown in the images are sold separately. This product includes the 118L Kegmenter itself, 4 inch flat lid, 4 inch tri-clover clamp and airlock.NOTE: Please be aware that this product is sent without carboard carton. It may arrive with some superficial scratches and small dents as the postal service can be rough with these.  The good thing is that they are made of thick stainless steel and can handle this type of treatment, but they just might arrive with some cosmetic scratches and scuff marks.  This will not change the performance in any way.   Looking at a way to control fermentation temps while fermenting? Our RAPT fermentation chamber would be ideal for our kegmenter range. If you want to fit a thermowell to the lid of this fermenter then you should really check out this 60cm Stainless Thermowel that includes the bulkhead fitting so you can mount this into the lid of this Fermenter. Download the Specification Sheet Here   Are you interested in fitting a glycol heating or cooling coil for temp control then you might want to check out this product.  This coil can fit into the lid of these fermenters and it’s a complete kit that includes the duotight bulkhead fittings.  To see the Temp Twister Stainless Coil Click Here.If you want to fit a thermowell to the lid of this fermenter then you should really check out this 60cm Stainless Thermowel that includes the bulkhead fitting so you can mount this into the lid of this Fermenter.