Condensate Drain Traps – Model 90-AC and 95-AC

Wright-Austin float style drain traps provide an economical method for draining condensate and fluid from gas/liquid separators for pressures up to 500 PSI without allowing compressed air and steam to escape with it. Water enters the trap from the topside and builds-up within the trap body. The float rises with the water level and when it gets high enough the float opens a valve. Water is expelled from the bottom and the float quickly comes back down, closing the valve before any air or steam is allowed to escape. A small amount of water remains within the trap, creating a liquid seal and keeping the valve closed tight. Internal parts, including the valve and seat, are corrosion-resistant, non-magnetic stainless steel. If installed in areas where freezing is a concern consider ordering a heater to prevent the retained water from freezing. • P/N 9014A2, Model 90-AC (for cast iron trap), 50 watt, 120 volt heating element. • P/N 9014D, Model 95-AC (for cast steel and 316SS trap), 100 watt, 120 volt heating element. The components to build float drain traps are usually stocked items and shipments made within 2-3 days to any USA location (7-10 days outside USA) after receipt of an order. If you need assistance with proper selection, please fill-out our inquiry form. Please send us mail explaining your requirement at [email protected] OR [email protected] or call us 00971 556099497 we will give you feedback within 48 hrs.