Drain Traps Model 230-AC

Wright-Austin Model 230-AC Cast Iron Float Style Drain Traps The Wright-Austin Model 230-AC float style drain trap is designed for gummy fluids and larger liquid volumes and system pressures up to 125 PSI. Ideal for use where gummy emulsions or cylinder lubricants make other traps inoperative, 230-AC float drain traps have a vertical inlet and down flow discharge design. Ample float power and large outward-opening discharge valve prevent loss of pressure. A small amount of water remains within the trap, creating a liquid seal and keeping the valve closed tight. Internal parts are stainless steel, including non-magnetic valve and seat. Working parts are attached to the cover for easy removal without disconnecting the trap from the line. No priming is required. If installed where freezing is possible, a 100 watt, 120 volt heating element should be used. P/N 9014D. Lead time for Model 230-AC float style drain traps is usually only 1 day after receipt of an order. If you need assistance with proper selection, please fill-out our inquiry form. Condensate drainage capacity chart in lbs/hour for pressures from 5 to 125 PSI; for volumetric capacities (GPH) divide by 8.34 Please send us mail explaining your requirement at [email protected] OR [email protected] or call us 00971 556099497 we will give you feedback within 48 hrs.